Aug 25, 2022 | Planned Work
We have been advised of Emergency planned works affecting a number of lines this evening:
Planned Work Start (Local UK): 26/08/2022 00:01
Planned Work End (Local UK): 26/08/2022 06:00
Impact: There will be a loss of service at some point during the timeframe stated above whilst we complete the maintenance work.
The service outage should only last for up to 1 Hour, however a 6 hour time frame has been given in the event of any unforeseen circumstances.
This is for emergency planned work to repair a fault on the network in the Papworth area. Resolution for fault reference: F010061503
Customers on the lines Virgin have listed have been notified.
Aug 25, 2022 | Planned Work
Our Juniper Switch in London Harbour Exchange Square is showing an error when any new config is committed to it.
Juniper have provided their suggested work-around/fix for this and we will perform this just after midnight tonight.
There should be no impact from this work at all – However we would rather announce this as at risk in case of any unexpected impact
We will update this once the work completes
[update 26/08/22 8:30]
The work last night while not causing any issue did not resolve the issue, The vendor has supplied a replacement Core Juniper switch and this will be swapped out later tonight
Aug 21, 2022 | Planned Work
Virgin Media are performing a network upgrade on their code network between midnight and 6am. There’s an expected downtime of 5 minutes. This has been reported to affect a small number of our lines on both our London bearer or terminated in London.
From their announcement
There will be a loss of service at some point during the timeframe stated above whilst we complete the maintenance work.
The planned outage is expected to occur between 00:01am and 02:00am and should only last for up to 30 minutes or if notified for 5 minutes where this is for Network Re-convergence only. However, should we incur any card failure and a replacement is required then as a worse case we will need to use the 6 hour change window.
This work is to upgrade software on equipment on our Network at multiple sites.
We will monitor these lines and ensure that they restore during the announced window
We apologise for any issues from this work
Aug 21, 2022 | Planned Work
Virgin Media are performing a network upgrade on their code network between midnight and 6am. There’s an expected downtime of 30 minutes. This has been reported to affect a small number of our lines on both our London bearer or terminated in London.
From their announcement
There will be a loss of service at some point during the timeframe stated above whilst we complete the maintenance work.
The planned outage is expected to occur between 00:01am and 02:00am and should only last for up to 30 minutes or if notified for 5 minutes where this is for Network Re-convergence only. However, should we incur any card failure and a replacement is required then as a worse case we will need to use the 6 hour change window.
This work is to upgrade software on equipment on our Network at multiple sites.
We will monitor these lines and ensure that they restore during the announced window
We apologise for any issues from this work
Aug 6, 2022 | Information, Planned Work
As part of our plan to enhance our network capacity and resilience over the next few days we will be migrating a number of core links to a new model of EPVN. The new config will be in place before any old links are removed. However there is a risk through this for brief drops and routing changes being visible.
This has already been tested in our lab and the configuraton is in place the final changes are just to move from the old configuration to the new setup
We apologise for the short notice for this work
We will update as the work progresses
[Update 1]
The work on the IBR core routers completed yesterday bringing our new Manchester core routers all live. There is some work this evening on our Juniper Core routers – again we don’t expect any substantal issues but you may notice some routing changes and bried periods of packet loss as the new routing converges
Jul 13, 2022 | Planned Work
Our Supplier Engineers will be performing their regular service on our Generator system at our Huntingdon Data Centre during the day of 15/7/22
This should have no impact on services but we treat this ‘at risk’ in case of any unexpected issues. The only possible impact here is that the auto changeover in case of a power failure will not function – However our UPS will be available and will cover the power until the Generator can be manually started
We will update this as the work completes
